Articles on: Equipment editing

The Hangbar

The hangbar is an equipment element used for placing products on hangers. It helps efficiently use store space and organize convenient product placement. It is best suited for clothing stores, where easy access to products is required.

How to create equipment with the Hangbar

You can create equipment with the hangbar manually or by using the ready template "Rack with hangbar".

To place equipment and its elements, use the workspace in the center of the editor, where the 2D model of the equipment is displayed.

Creating any equipment starts with placing the base:

In the elements panel on the left, select the base type:

Rectangle;
Trapezium.

Drag the selected element to the workspace.

After placing the base, follow this order when adding additional elements:

Rack with hangbar:

Back wall (with rails or without);
Hangbar.

Rack with hangbar and hook:

Back wall (with rails or without);
Hangbar;
Hook.

Note! When dragging the hangbar onto the back panel with rails, the hangbar will snap into the holes located at the cursor level.

To configure an equipment element, select the required element in the workspace and click "Set up" on the top toolbar.

The following parameters are available for the hangbar:

Length, m;
Diameter, m;
Distance from the back wall to the axis hangbar, m;
Ability to set the hangbar as active / inactive.

You can learn more about this in the article.

Important! It is not possible to change the length of a hangbar that is already inserted into holes.

How to place products on equipment with the Hangbar

To place a product on the hangbar, left-click the product in the product list and drag it onto the hangbar.

To move multiple products at once, press "Ctrl", select the required products in the list, then left-click and drag them onto the hangbar.

Products placed on the hangbar are automatically positioned on a hanger and displayed sideways. The hanger height is 0.08 m.

If a hook is installed on the hangbar, the product is displayed facing forward.

Important! The order of products on hooks and hangbars is set manually. Layout rules and autoplacement do not work for this equipment element.Important! The hangbar cannot be viewed in top view projection.

To open the 3D visualization, view equipment dimensions, and change the display scale, click the corresponding button on the bottom panel.

Recommendation: To select equipment with all its elements, simply select the base and lift it.

Updated on: 17/03/2026

Was this article helpful?

Thank you!