> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://helpdesk.planohero.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# The Hangbar

## ${color}[#000000](The Hangbar)
The hangbar is an equipment element used for placing products on hangers. It helps efficiently use store space and organize convenient product placement. It is best suited for **clothing stores**, where easy access to products is required.
---
### How to create equipment with the Hangbar
You can create equipment with the hangbar **manually** or by using the ready template **"Rack with hangbar"**.

To place equipment and its elements, use the **workspace** in the center of the editor, where the **2D model of the equipment** is displayed.

Creating any equipment starts with placing the **base**:
* In the elements panel on the left, select the base type:
1. Rectangle;
2. Trapezium.
* Drag the selected element to the **workspace**.

After placing the base, follow this order when adding **additional elements**:
* Rack with hangbar:
1. Back wall (with rails or without);
2. Hangbar.
* Rack with hangbar and hook: 
1.  Back wall (with rails or without);
2. Hangbar;
3. Hook.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/6/4/b/e64b77ae74de2800/21angl_1ru2vf1.webp)

|| Note! When dragging the hangbar onto the back panel with rails, the hangbar will snap into the holes located at the cursor level.

To configure an **equipment element**, select the required element in the **workspace** and click **"Set up"** on the top toolbar.

The following parameters are available for the hangbar:
* Length, m;
* Diameter, m;
* Distance from the back wall to the axis hangbar, m;
* Ability to set the hangbar as active / inactive.
You can learn more about this [__in the article__](https://helpdesk.planohero.com/en/article/management-of-equipment-element-activity-151wgen/).

||| Important! It is not possible to change the length of a hangbar that is already inserted into holes.
---
### How to place products on equipment with the Hangbar
To place a product on the **hangbar**, left-click the product in the product list and drag it onto the **hangbar**.

To move **multiple products at once**, press **"Ctrl"**, select the required products in the list, then left-click and drag them onto the **hangbar**.

Products placed on the **hangbar** are automatically positioned on a **hanger** and displayed sideways. The hanger height is **0.08 m**.

If a **hook** is installed on the hangbar, the product is displayed facing forward.

||| Important! The order of products on hooks and hangbars is set manually. Layout rules and autoplacement do not work for this equipment element.
||| Important! The hangbar cannot be viewed in top view projection. 

To open the **3D visualization**, view **equipment dimensions**, and change the **display scale**, click the corresponding button on the bottom panel.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/6/4/b/e64b77ae74de2800/22angl_3d1fxd.webp)

| Recommendation: To select equipment with all its elements, simply select the base and lift it.